8. Guarantee
When used properly Renfert guarantees
all parts of the Top spin for 3 years. In
case of any claims for warranty original
dealers' invoice is required. Parts which
are subject to natural wear and tear (wear
parts) and consumables are excluded
from the guarantee. These parts are mar-
ked in the spare part list.
The guarantee is void for damage caused
by misuse, disregard of the instructions for
use, cleaning, maintenance and connec-
tion, for improper self-repaired units or
repair by untrained personnel, for use of
spare parts from other manufacturers and
on influences outside the normal practice
or unauthorized in the instruction manual.
Servicing made under guarantee does not
extend the guarantee.
9. Disposal instructions for
countries in the EU
To conserve and protect the environment,
prevent environmental pollution and
improve the recycling of raw materials, the
European Commission adopted a directive
that requires the manufacturer to accept
the return of electrical and electronic units
for proper disposal or recycling.
Within the European Union units with this
symbol should not therefore be disposed
of in unsorted domestic waste:
For more information regarding proper
disposal please apply at your local authori-
ties.
EN
10. Technical Data
Voltage:
Power consumption:
Fuse:
1835-0000 (230V/50Hz):
1835-4000 (115V/60Hz):
Revolutions:
Dimensions (BxHxD): 166 x 322 x 149 mm
Weight:
Drill type:
Table hub:
Level of noise pressure according to
DIN EN ISO 11202:
Laser:
Laser-Class:
Wavelength:
Power output P0:
11. Parts Supplied
1 Top spin
1 stepped drill bit (see drawing 1)
1 instruction manual with spare parts list
1 mains cable
1 set of hardware
- 4 -
230 V, 50 Hz
115 V, 60 Hz
M1A (1A, medium slow)
M2A (2A, medium slow)
16000 1/min.
[6.54 x 12.69 x 5.87 inch]
HM-drill with shaft-Ø 3 mm
[0,12 inch]
0 - 12 mm [0 - 0.47 inch],
infinitely variable
LpA < 70dB(A)
630-680nm
max. < 1mW
150 W
5 kg
2