WARNING
Use only with adult supervision
Do not allow child to climb or sit on the product as it is not stable and not
intended to support the weight of a child.
SKU# 5410860
RAINBOW ASSEMBLY INSTRUCTIONS:
1. Open the Air Valve located at lower part of the rainbow and four clouds (labeled in diagram).
Using an air pump (not included), inflate the rainbow and immediately close the air valve.
2. Do not over-inflate.
3. Once a section is inflated, press the air valve inside the inflated section.
4. Water base fill in water after inflate rainbow, and hose should fit well to sprinkler adaptor
properly while playing.
SPRINKLER ASSEMBLY INSTRUCTIONS:
1. Attach a garden hose to Hose Adapter located at near the lower part on the back of rainbow
(labeled in diagram).
2. Turn hose on and adjust the flow of water as necessary.
VINYL PLASTIC REPAIR KIT INSTRUCTIONS:
1. Cut vinyl to cover the hole or puncture.
2. Thoroughly clean damaged surface and allow to dry for a minimum of 10 minutes.
3. Remove vinyl patch from paper backing.
4. Press patch firmly over hole or puncture.
5. Do not inflate after 20 minutes repair.
pottery barn kids
RAINBOW SPRINKLER
Made in China
Thank you for your purchase
Stores / catalog / www.potterybarnkids.com
151 Union Street
USA 1.800.290.8181
Age:3+