SonoSite DICOM Guia Del Usuario página 10

Printer configuration (page 3)
Max. Density Maximum density of the black
value.*
Min. Density Minimum density of the white
value.*
Border Density Density of the areas surrounding
and between film images.*
Empty Density Empty image density.*
Settings Defines how images are sent to the
printer, either as Color (RGB) or Monochrome
images.
Magnification Type of interpolation used during
printing.
Configure Printer-specific configuration value.
If using generic printer settings, no configuration
strings are available.
* In hundredths of optical density (OD)
Storage Commit configuration
Name Unique network name for the ultrasound
system. Default is SonoSite.
Alias Name used to identify the network location
of the ultrasound system.
IP Address Unique identifier of the storage
commitment server.
Port Device port number. IP port 104 is typically
assigned for DICOM.
AE Title DICOM Application Entity Title.
Worklist configuration (page 1)
Name Network host name for a worklist server.
Cannot contain special characters.
Alias Personalized name for a worklist server.
May contain special characters.
AE Title Application Entity Title. May contain
special characters.
IP Address Unique identifier for the worklist
server.
6 Configuring the system for DICOM
Port Device port number. IP port 104 is typically
assigned for DICOM.
Worklist configuration (page 2)
Date Range Defines the date range for manual or
automatic queries.
This Device Only Restricts the query to patient
procedures that are scheduled for the system
based on its AE Title.
Automatic Query Turns automatic query on/off.
Occurs Every In an automatic query, length of
time between automatic updates.
Start Time In an automatic query, start time for
the automatic update (displayed in 24 hour time).
MPPS configuration (page 1)
Name Unique network name for the ultrasound
system. Default is SonoSite.
Alias Name used to identify the network location
of the ultrasound system.
IP Address Unique identifier of the MPPS server.
Port Device port number. IP port 104 is typically
assigned for DICOM.
AE Title DICOM Application Entity Title.
MPPS configuration (page 2)
Attempts Number of times the system tries to
resend a failed transfer.
Interval (sec) Length of time between attempts.
Associating devices with locations
For each location, you must select which devices
(archivers and printers) you want to receive the
data that you transfer, which archivers you want
to designate as an MPPS or storage commitment
server, and which worklist server you want to
receive data from. Thereafter, you simply select
the current location before using the ultrasound
system.