Archiving And Printing - SonoSite DICOM Guia Del Usuario

• Select Procedure. Under Additional
Worklist Query Parameters, specify any
of the following:
• Modality Select a procedure type from
the list. US (Ultrasound) is the default.
• Requested Procedure ID Type
a procedure ID.
2 Select Query.
The worklist appears with the query results.
The number of results is in the lower right
screen.
3 Highlight the patient procedure you want,
and then select Select.
The information imports into the patient
information form.

Archiving and printing

Images and clips saved on the ultrasound system
are in internal storage. When the system detects
the network connection, the saved images and
clips (exams) automatically transfer to devices
as specified in the Transfer Images setting.
(See "Location configuration (page 1)" on
page 3.) You can also manually transfer them.
The network connection icon
when patient exams are archiving. Pending
exams are archived or printed starting at the top
of the patient list.
Note: For information about exporting to a USB
storage device, see the ultrasound system user guide.
To display the patient list
1 Do one of the following:
• (S Series) Press the Patient control key and
then press the Review knob.
• (M‐Turbo) Press the
2 If there is an active exam, press List.
is animated
key.
REVIEW
To verify that exams transferred
Display the patient list.
The right most column shows the status of
exam transfer.
• Patient exam is archived.
• Patient exam is suspended. The
system tried the number of times specified
on the configuration page. This exam
needs to be manually archived.
• S Storage commitment for this exam
is suspended.
• C Storage commitment was successful.
Patient exams with no status markers are
pending archiving.
To display information about an exam
You can display information about an exam,
including transfer details.
1 In the patient list, select the exam.
2 Select Info.
To manually transfer exams
1 Verify the following:
• The ultrasound system is on, and the
correct location is selected.
• The ultrasound‐connected icon
appears in the system status area on the
screen.
• If an Ethernet connection, the LAN link
light (green LED) next to the Ethernet
connector is on.
• For a wireless connection, the wireless
icon appears in the system status
area on the screen.
2 Display the patient list.
11