Translation of the original operating instructions
TRANSLATION OF THE ORIGINAL
OPERATING INSTRUCTIONS
Contents
Assembly.......................................................... 24
Startup.............................................................. 26
Operation..........................................................26
Storage............................................................. 31
Disposal............................................................31
Warranty........................................................... 33
ABOUT THIS HANDBOOK
Read this documentation before starting up
the machine. This is a precondition for safe
working and flawless operation.
Observe the safety warnings in this docu-
mentation and on the product.
This documentation is a permanent integral
part of the product described and must be
passed on to the new owner if the product is
sold.
Explanation of symbols
CAUTION!
Following these safety warnings care-
fully can prevent personal injury and/or
material damage.
Special instructions for greater ease of
understanding and improved handling.
PRODUCT DESCRIPTION
This documentation describes a hand-held scythe
with a petrol engine.
Symbols on the machine
Caution! Special care required during
use.
469721_a
Read the operating instructions before
start-up.
Wear safety goggles, safety helmet,
ear defenders.
Wear gloves.
Wear safety shoes.
Keep body and clothing away from cut-
ting parts.
Danger due to ejected objects!
The distance between the device and
15m(50ft)
other persons must be at least 15 m.
Product overview
see Figure 1
1 Cutting blade
2 Transmission
3 Guard plate
4 Bike handle
5 Throttle lever
6 "Engine off / on" switch
7 Throttle lever lock
8 Shoulder strap
9 Air filter cover
10 Petrol tank
11 Decompression valve
12 Primer (cold start)
13 "Choke / run" lever
Safety and protective equipment
Emergency Stop
In the event of an emergency, swith the ignition
switch to "STOP".
21