B) Disinfection; Use; A) Accessories Preparation - DTF PURENEB AERODJINN Manual De Uso

b) Disinfection

Before the first use and after each session:
1. Dismantle each
element
Nota: after cleaning in boiling water the tubes colour may turn to white but this would not affect the good operating of
your nebulizing kit.

4. Use

a) Accessories preparation

Please respect the following steps.
1. Fix the M selector on the
top part of the nebulizing kit
6. Connect the pressure tube
to the inlet as shown
2a. Place the elements in boiling water for
20 minutes
2b. Use a baby bottle steam sterizilizer with
microwave
2c. Clean the parts in dishwasher at 70°C maximum
2. Insert the jet-pipe on the bottom part
5. Fix the mask or the mouth piece to the
nebulizing kit
OR
OR
13
3. Let the elements
dry on a clean cloth
3. Pour the solution into
the tank
4. Screw the top part to
the tank