NSK PTL-CL-LED Manual De Instrucciones página 5

Ocultar thumbs Ver también para PTL-CL-LED:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4. Maintenance
After each use, clean the surface of the coupling with brush etc. ( Do not use metal brush ) , and
wipe it with the cotton moustened with disinfecting alcohol.
This coupling can not be Autoclave sterilization.
This product can not be cleaned and disinfected with a Thermo-Disinfector.
CAUTION
·Do not wipe with, or clean or immerse in, high acid water or sterilizing solutions.
·Do not connect or disconnect the hose or handpiece until the drive motor has
completely stopped.
6
5. Non-Retraction Valve
A Non-Retraction Valve is equipped in the Coupling Joint, which shuts off the water retraction
right at the handpiece head, to prevent oral fluids sucked into the water line. ( Fig. 5 )
To replace the valve, remove the back-end gasket. Pull and remove the water tube, and
replace the Non-Retraction Valve.
Water Tube
Non-Retraction Valve
Gasket
Fig. 5
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ptl-cl-led iiiKcl-led

Tabla de contenido