Scan Pc Software For Kodak Personal Photo Scanners; Install Scan Pc Software - Kodak P461 Guia Del Usuario

2. Click the 'Safely remove USB mass Storage device' message with the corresponding Drive.
3. When the 'Safe to Remove Hardware' message appears, you can safely remove the scanner's USB cable.
For MAC users
On the desktop, right-click on the
S c a n P C S o f t w a r e f o r K O D A K P e r s o n a l P h o t o S c a n n e r s
With the Scan PC Software for KODAK Personal Photo Scanners (Scan PC Software), you can easily scan photos and save the
scanned pictures directly to the connected PC.
System Requirements

Operating system: WINDOWS, XP SP2 or later, VISTA, WINDOWS 7 - 32-Bit
The Scan PC Software is not supported on the MAC OS

INTEL PENTIUM IV processor

1.2 GHz processor speed

512 MB RAM minimum

10MB free hard disk space for Scan PC Software for KODAK Personal Photo Scanners

200MB free hard disk space for KODAK EASYSHARE Software
NOTE: APPLE QUICKTIME Player is required for some software features. Visit APPLE to download the latest version of
the QUICKTIME Player.

Install Scan PC Software

1. Connect the scanner to your PC (see page 13), using the KODAK
Mobile Memory Card
2. Open a Windows Explorer window.
3. Select
KODAKSCAN>KODAK>Software>KODAK_Scan_PC_Software_Setup_Vxxxx
4. Double-click the
5. In the Install Wizard window, click
Next
6. Click to install in default location, or select desired location and then click
Next
.
7. In the Ready to Install window, click
8. After the software is installed, click
 Once installed, the
 If you want to close the
select Exit.
KODAKSCN
volume, then select
ScanPC_KODAK_Scanner_Setup_Vxxxx.exe
Next
.
Install
.
Finish
Scan PC Software
runs automatically upon PC startup, and the
Scan PC for KODAK Personal Photo Scanners
Eject "KODAKSCN"
.
MICROSD
file.
icon stays on the system tray.
software temporarily, right-click on the icon and
Customer Support: http://www.pandigital.net/kodaksupport 15