Replacing The Battery - Sonel CMP-3000 Manual De Uso

WARNING
To avoid electric shock, do not use the meter if the bat-
tery compartment cover is not in place or is not
properly fastened.
CMP-3000 is powered by one 6LR61 9 V battery. It is recom-
mended to use alkaline batteries.
To replace the battery:

set the rotational function selector at OFF,

remove test leads from the terminals of the meter.

unscrew 1 screw fixing the compartment cover,

remove the cover,

remove the battery and insert a new one, observing the polarity,

put on the cover and tighten the fixing screw.
 While performing the measurements with the battery
symbol displayed, the user must be aware of additional
measurement uncertainties or unstable operation of the
device.
 If the meter does not work properly, check the battery in
order to ensure that it is in proper condition and properly
installed in the device.

7 Replacing the battery

CMP-3000 – USER MANUAL
63