Accessories; Environmental Protection / Disposal - Protool DWP 4000 DEC Manual Original / Lista De Piezas De Repuesto

Disassembly of the slides
1. Push the depth stopper [8-2] into the
housing until the arresting button [11-1]
is at the level of the sign for dismantling
the slides [11-2] – see fi gure [11 a].
2. Press the arresting button [11-1] and
concurrently remove the slides from the
holder – see fi gure [11 b].
3. Press the orange button [8-1] and con-
currently release the depth stopper – see
fi gure [11 c].
Transport lever disassembly
1. Press the button [12-1] and concurrently
pull it out– see fi gure [12 a].
2. Remove the released button [12-1] (fi g-
ure [12 b]) with the transport lever [12-2]
and the spring [12-3] from the slides
(fi gure [12 c]).
Clean individual parts, replace defective or
worn parts, and assemble in the opposite
sequence.
CAUTION
During reassembly of the transport
lever into the slides, pay due care to
correct fi tting of the spring [12-3] in
the transport lever. Incorrect assem-
bly may result in dysfunction of the
belt transport.
9

Accessories

Use only original PROTOOL accessories and
PROTOOL consumable material intended for
this machine because these components
are designed specifi cally for the machine.
Using accessories and consumable mate-
rial from other suppliers will most likely af-
fect the quality of your working results and
limit any warranty claims. Machine wear or
your own personal workload may increase
depending on the application. Protect your-
self and your machine, and preserve your
warranty claims by always using original
PROTOOL accessories and PROTOOL con-
sumable material!
18
10 Environmental
Protection / Disposal
Power tools, accessories and packaging
should be sorted for environmental-friendly
recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical and elec-
tronic equipment and its incorporation into
national law, power tools that are no longer
suitable for use must be separately collect-
ed and sent for recovery in an environmen-
tal-friendly manner.
REACh
REACh is a European Chemical Directive
that came into effect in 2007. As "down-
stream users" and product manufacturers,
we are aware of our duty to provide our
customers with information. We have set up
the following website to keep you updated
with all the latest news and provide you
with information on all the materials used
in our existing products:
http://www.tts-protool.com/reach