Initial Commissioning - ratiotec RS 2000 Manual Del Usuario

[EN]
Operation
Place the Cash Box on a flat surface.
Connect the power supply unit with the Cash Box to the electricity supply.
Initially the green LED lights up. The Cash Box is not ready for operation
yet. As soon as the green LED turns off, the system starts and you can
follow the next step (duration of system start approx. 1 minute).
3.1. Administration Website
After properly connecting your cash box, please download the
cash box finder from our homepage. You will find it among "cash box"
(https://ratio-tec.com/download) Afterwards run it and start a search.
Click on the located cash box and the link will automatically open in your
browser.
Log in with the following user information:
Username: data
Password: Is included in the scope of delivery (can be changed)
All recently received billing data is listed on the dashboard homepage.
Set time zone
If you are using the Cash Box in a time zone other than Europe/Berlin,
please follow the instructions in the detailed user manual; section:
"Changing the time zone (Local time zone)".

Initial commissioning:

For the initial commissioning, the Cash Box must obtain the time of day.
The time search is in progress while the red LED is permanently flashing.
13