36
S16
Specifications
Processing
A/D-D/A conversion
(Cirrus Logic A/D CS5368, D/A CS4385)
Networked I/O latency
(stagebox in > console processing* > stagebox out)
Connectors
XLR inputs, programmable mic preamps, designed by Midas
XLR outputs
Phones outputs, 1/4" TRS
AES50 ports, SuperMAC, NEUTRIK etherCON
P-16 connector, Ultranet (no power supplied)
MIDI inputs / outputs
ADAT Toslink outputs (2x 8 Ch)
USB type B, rear panel, for system updates
Mic Input Characteristics
Design
THD + noise, 20 dB gain, 0 dBu out
Input impedance XLR, unbal. / bal.
Non clip maximum input level, XLR
Phantom power, switchable per input
Equivalent input noise level, XLR (input shorted)
CMRR, XLR, @ 20 dB gain (typical)
CMRR, XLR, @ 40 dB gain
Input/Output Characteristics
Frequency range, @ 48 kHz sample rate, 0 dB to -1 dB
Dynamic range, analog in to analog out (typical)
A/D dynamic range, preamp and converter (typical)
D/A dynamic range, converter and output
Cross talk rejection @ 1 kHz, adjacent channels
Output level, XLR, nom./max.
Output impedance, XLR, unbal. / bal.
Phones output impedance / level
Residual noise level, XLR and TRS
Indicators
Display
Front status LEDs
Meter
Rear panel
Power
Switch-mode autorange power supply
Power consumption
Physical
Dimensions
Weight
*incl. all channel and bus processing, excl. insert effects and line delays
NOTE: Please verify that your specific AES50 connections provide stable operation prior to using the products in a live performance or recording situation. The maximum distance for
AES50 CAT5 connections is 100 m / 330 ft. Please consider using shorter connections where possible for gaining safety margin. Combining 2 or more cables with extension connectors
can reduce the reliability and maximum distance between AES50 products. Unshielded (UTP) cable may work well for many applications, but entails an additional risk for ESD issues.
We guarantee, that all our products will perform as specified with 50 m of Klark Teknik NCAT5E-50M, and we recommend using cable of similar quality, only. Klark Teknik also offers
the very cost-effective DN9610 AES50 Repeater or DN9620 AES50 Extender for situations where extremely long cable runs are required.
24-bit @ 44.1 / 48 kHz,
114 dB dynamic range
1.1 ms
16
8
1 (mono)
2
1
1 /1
2
1
Midas
< 0.006 % A-weighted
5 kΩ / 10 kΩ
+23 dBu
48 V
-128 dBu
> 70 dB
> 80 dB
10 Hz - 22 kHz
106 dB
109 dB
108 dB
100 dB
+4 dBu / +21 dBu
75 Ω / 75 Ω
40 Ω / +25 dBm (mono)
-87 dBu A-weighted
4-digit, 7-segment, LED
AES50-A, red/green
AES50-B, red/green
HA Locked, red
SN Master, green
Splitter, orange
Out +16, orange
Out +8, orange
Sig, -30 dB, -18 dB,
-12 dB, -9 dB, -6 dB,
-3 dB, Clip
Splitter mode, orange
100-240 V (50/60 Hz)
45 W
482 x 225 x 89 mm (19 x 8.9 x 3.5")
4.7 kg (10.4 lbs)