Dashboard; Folding And Unfolding - Ninebot KickScooter Manual Del Usuario

Dashboard

Speedometer
Speedometer: Display the current speed of the KickScooter, as well as error codes.
Pedestrian mode: Max. speed is 3.7 mph (6 km/h) with flashing rear light.
Modes: Step on the Power Switch / Fender Brake twice to switch between the modes.
: Energy saving mode [Max. speed is 6.2 mph (10 km/h) with smooth acceleration, suitable for beginners];
: Standard mode [Max. speed is 9.3 mph (15 km/h)];
: Sport mode [Max. speed is 12.4 mph (20 km/h), powerful, only recommended for skilled riders].
Error Display: The lit wrench icon indicates the KickScooter error.
Overheat Warning: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C).
or the motor temperature has reached 194°F (90°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is
restored to normal range.
Bluetooth: A blinking Bluetooth icon indicates that the vehicle is ready to connect. A solid Bluetooth icon
indicates that the vehicle is connected to a mobile device.
Cruise Control: Enabled when riding at a constant speed for 5 secs. You can exit the mode by braking.
Battery Level: The total battery level equals to 4 bars. Each bar equates to approximately 25% battery level.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
05
Pedestrian Mode
Sport Mode
Standard Mode
Energy saving Mode
Headlight
Battery Level
Cruise Control
Bluetooth
Overheat Warning
Error Display

4 Folding and Unfolding

Unfolding
1. Press the folding switch and lift 2. Unfold the kickstand to support
up the stem until you hear a the KickScooter.
click.
* Please press the upper folding switch.
Folding
1. Press the folding switch.
3. Rotate both sides to align the
foldable handle.
2. Put down the stem to the baseboard with the
sound of "click".
* The KickScooter will power off once folded.
06