Names Of Parts (Figure ➃); Cleaning And Sterilising; Cleaning Intervals; Cleaning (Figure ➀ In Reverse Order) - NUK e-Motion Instrucciones De Operación

• Do not leave teats in cold sterilising solu-
tion beyond the period specified by the
manufacturer, as this may cause damage to
the material.
• For hygiene and safety reasons, teats should
be replaced every 1-2 months.
1 Valve
2 Breast shield
3 Connection ring
4 Lip valve
5 Breast milk container
6 Stand for breast milk container
7 Sealing disc
8 Teat
9 Screw ring
10 Protective cap
Hygiene is of priority when handling
breast milk and all parts that come
into contact with it. The pump should
therefore only be used in a clean and
sterile condition.

5.1 Cleaning intervals

After each use:
• All except for the motor unit
accessories
12 and adapter 18
cleaned with water and sterilised
after each use.
immediately
5.2 Cleaning
(Figure
Unplug the mains adapter
Caution!
wall socket before cleaning.
Clean the lip valve
Caution!
and pointed bristles may damage the valve.
1. Unscrew the motor unit
the connection ring
4. Names of Parts

5. Cleaning and Sterilising

must be thoroughly
➀
in reverse order)
from the
18
carefully. Hard
4
together with
12
3 from the bottle 5 .
• Use teats only with NUK FIRST CHOICE
bottles. The NUK Vented Teat and NUK
Breast Milk
EN 14350.
➃
(Figure
11 Power supply plug
12 Motor unit
13 Warning light when the voltage is too low
(batteries need changing)
14 On/off button
15 Battery compartment catch lock
16 Battery compartment lid
17 Suction power regulator
18 Mains adapter
19 Interchangeable plug attachments
2. Remove the lip valve
of the breast shield.
3. Unscrew the connection ring
motor unit .
12
4. Pull the motor unit
shield .
2
5. Remove the valve
6. All accessories apart from the motor unit
and adapter
18
under running water as milk residues may
result in the build up of bacteria and may
damage the material.
All accessories, apart from the motor
Note:
unit , teat
12 8
cleaned in a dishwasher.
7. Wipe the motor unit
Caution: Never
adapter in water as this could damage the
electrics.
19
Container comply
)
from the lower part
4
from the
3
off the breast
12
from the breast shield
1
should be cleaned and rinsed
and adapter may be
18
with a damp cloth.
12
immerse the motor unit or
with
.
2
12