Fein BOP6 Instrucciones De Uso página 11

OBJ_BUCH-0000000005-001.book Page 11 Friday, February 5, 2010 8:57 AM
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle
(figure 2).
To loosen the clamping strap of the auxiliary
handle, turn the handle.
Slide the clamping strap of the auxiliary han-
dle over the collar.
Turn the auxiliary handle to the desired
working position and retighten it.
Removing the drill chuck (figure 3).
Insert a Allen key into the drill chuck and
tighten the drill chuck.
Unscrew the drill chuck using the Allen key as
a lever.
en
11