Before To Start; Uk User Manual - SBS TEEARSETBT810K Manual Del Usuario

UK
USER'S GUIDE

BEFORE TO START:

The battery must be fully charged at the first use:
- Plug the charger in the charging port
- A red LED will indicates the charging status
- The fully charge takes about 2-3 hours
- When fully charged, the red light becomes green
HOW TO PAIR THE HEADSET THE FIRST TIME:
- Keep the headset and your smartphone within 1 meter during the pairing
- With the headset off, long press the MFB button (6/7 seconds) till the red
and green leds will flash alternatively
- Turn on Bluetooth® on your smartphone and set it in search mode
- When the smartphone find the headset, select it from the list
- If required, insert the password code 0000
- The green led will flash if paired successfully
HOW TO PAIR TWO SMARTPHONE:
- After paired the phone 1, turn off the Bluetooth on the phone 1 and pair
the phone 2.
- Turn on again the Bluetooth on the phone 1 to connect both phones
- NOTE: Some function can be restricted while two phones are paired
FUNCTIONS:
- Power on: press and hold MFB button about 3 seconds till the green led
flashes
- Power off: press and hold MFB button about 4 seconds till the red led
flashes once
- Answering a call: press any key on the headset
- Ending a call: press the MFB
- Rejecting a call : long press MFB (2 seconds)
- Play music : use the MFB to play or pause while you're listening music.
- Previous/next track : in music mode, press (+) about 2 seconds to select the
next song, press (-) about 2 seconds to select the previous song
- Volume control: shortly press (+) or (-) to increase or decrease the volume
- Voice dialing (if supported) : press the MFB key for 2 seconds
- Recall the last number : press twice MFB key
4