ASROCK Fatal1ty P67 Performance Serie Manual De Instrucciones página 21

3.5mm Audio Cable
(Optional)
USB 2.0 Headers
(9-pin USB8_9)
(see p.4 No. 27)
(9-pin USB10_11)
(see p.4 No. 26)
(9-pin USB12_13)
(see p.4 No. 25)
Infrared Module Header
(5-pin IR1)
(see p.4 No. 29)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.4 No. 32)
1. High Defi nition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
Fatal1ty P67 Performance Series Motherboard
Either end of the 3.5mm audio
cable can be connected to the
portable audio devices, such
as MP3 player and mobile
phone or the Line-in port of
your PC.
Besides six default USB 2.0
USB_PWR
P-9
P+9
ports on the I/O panel, there
GND
DUMMY
are three USB 2.0 headers on
1
this motherboard. Each
GND
P+8
USB 2.0 header can support
P-8
USB_PWR
two USB 2.0 ports.
USB_PWR
P-11
P+11
GND
DUMMY
1
GND
P+10
P-10
USB_PWR
USB_PWR
P-13
P+13
GND
DUMMY
1
GND
P+12
P-12
USB_PWR
This header supports an
IRTX
+5VSB
optional wireless transmitting
DUMMY
and receiving infrared module.
1
GND
IRRX
This is an interface for front
GND
PRESENCE#
panel audio cable that allows
MIC_RET
OUT_RET
convenient connection and
control of audio devices.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
21