Atx Power Connector - ASROCK Fatal1ty P67 Performance Serie Manual De Instrucciones

Power LED Header
(3-pin PLED1)
(see p.4 No. 12)
Chassis and Power Fan Connectors
(4-pin CHA_FAN1)
(see p.4 No. 28)
FAN_SPEED_CONTROL
(3-pin CHA_FAN2)
(see p.4 No. 10)
(3-pin CHA_FAN3)
(see p.4 No. 39)
(3-pin PWR_FAN1)
(see p.4 No. 40)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.4 No. 3)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
(3-pin CPU_FAN2)
(see p.4 No. 2)

ATX Power Connector

(24-pin ATXPWR1)
(see p.4 No. 7)
Fatal1ty P67 Performance Series Motherboard
Please connect the chassis
1
power LED to this header to
PLED-
PLED+
indicate system power status.
PLED+
The LED is on when the system
is operating. The LED keeps
blinking in S1 state. The LED is
off in S3/S4 state or S5 state
(power off).
Please connect the fan cables
to the fan connectors and
match the black wire to the
GND
+12V
CHA_FAN_SPEED
ground pin.
GND
CHA_FAN2_PWR
CHA_FAN_SPEED
PWR_FAN_SPEED
+12V
GND
Please connect the CPU fan
FAN_SPEED_CONTROL
CPU_FAN_SPEED
cable to the connector and
+12V
GND
match the black wire to the
ground pin.
1 2 3 4
Pin 1-3 Connected
GND
+12V
CPU_FAN_SPEED
Please connect an ATX power
12 24
supply to this connector.
1 13
3-Pin Fan Installation
23