Fluke Networks SimpliFiber Pro Guía De Uso página 6

SimpliFiber Pro Users Guide
Features


: On/off key.


: Selects auto wavelength mode, which is used with a
SimpliFiber Pro meter. The AUTO LED lights. The source's
signal includes an identifier that tells the SimpliFiber Pro
meter which wavelength to measure.

Press
indicate the wavelength.


: Switches between continuous wave and 2 kHz
modulated output signals.
 Use continuous wave mode (
for making loss or power measurements with a meter
other than a SimpliFiber Pro meter.
 Use the 2 kHz modulated output mode (
blinking) if locating fibers with a meter other than a
SimpliFiber Pro meter.
Also enables or disables auto power-off. See "Auto Power-
Off".


: Selects FindFiber mode, which is used with a SimpliFiber
Pro meter to help you quickly identify link connections at
patch panels. The ID 1 LED lights if the source is in FindFiber
mode.
4
to change the wavelength. The wavelength LEDs
LED on steady)
CW/2 kHz
CW/2 kHz
GBT01.EPS
LED