RiverRidge 06-165 Instrucciones De Ensamblaje página 11

STEP 7
1. Attach door (6) to right side
panel (3) by inserting 8 screws
(F) through holes on 2 hinges (G),
then tighten to right side panel (3).
2. Attach knob (Q/R) to door (6)
by inserting 1 machine screw (H)
through hole on door (6), then
tighten to knob (Q/R).
STEP 8
M
P
N
OPTION #1
DRYWALL
N
WALL ANCHOR
WITH SCREW
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location.
Using a pencil, make 1 small mark on wall
through hole on bracket (P). Move cabinet away
from wall and screw 1 plastic anchor (M) into wall
on pencil mark.
2. Place cabinet against wall, insert 1 screw (N)
through hole on bracket (P), then tighten to
plastic anchor (M).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 1 screw (N) through hole on bracket (M),
then tighten through drywall and into wood stud.
*Tip: Anchor bracket (P) can be adjusted to correct distance from wall to cabinet as needed. Once
adjusted, be sure to re-tighten bracket inside cabinet for stability
OPTION #2
DRYWALL
N
WOOD
STUD
SCREW
ONLY
F
F
F
F
3
6
F F
F F
M
P
N
H
Q/R