■ Replacement of batteries in remote controller
battery
reinstall
1. Press the back side of remote controller marked the cover of battery box along the arrow
direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of „+" polar and „-"
remove
polar are correct.
3. Reinstall the cover of battery box.
Cover of battery box
NOTICE
▪ During operation, point the remote control signal sender at the receivingwindow on indoor unit.
▪ The distance between signal sender and receiving window should be nomore than 8m, and there should be no obstacles
between them. or wireless telephone; remote controller should be close to indoor unit during operation.
▪ Replace new batteries of the same model when replacement is required.
▪ When you don't use remote controller for a long time, please take out the batteries.
▪ If the display on remote controller is fuzzy or there's no display, please replace batteries.
- 45 -