Product description/correct use
The Schüco combination storage cylinders are a combina-
tion of a hot water cylinder and a buffer storage cylinder.
The small internal cavity of the storage cylinder contains hot
water, the larger outer shell of the storage cyliner contains
the water in the central heating circuit.
The combination storage cylinder heats the domestic hot
water and provides auxiliary heating using solar energy.
Overview:
Key
1.0 Storage cylinder
1.1 Hot water standby capacity
1.2 Auxiliary heating hot water area
1.3 Solar hot water area
1.40 Heating circuit flow/
solid fuel boiler flow connection
1.41 Heating circuit return/
solid fuel boiler return connection
1.42 Auxiliary heating flow connection
1.43 Auxiliary heating flow return connection
1.5 Domestic hot water connection field
1.51 Hot water connection
1.52 Cold water connection
1.53 Circulation connection
1.7 Solar tubular heat exchanger
1.71 Solar circuit flow connection
1.72 Solar circuit return connection
1.8 Stratification plate
1.91 Ventilation opening
1.93 Screw-in aperture for protective anode
2.0
Thermal insulation with zip fastening
2.03 Base plate thermal insulation
2.04 Top cover thermal insulation
2.05 Thermal insulation, protective cover
4.1 Temperature sensor channel
Function of the stratification plate
The stratification plate (1.8) is used to separate the standby
area from the solar area. This prevents any undesirable mix-
ing of the storage cylinder contents.
Technical data =
4
13 14
Alternative use or use beyond this remit is not in accord-
ance with its purpose. Incorrect use can result in the death
or serious injury of the user or a third party, and may damage
the appliance, the installation or other material assets. The
manufacturer/supplier shall not be liable for any resulting
damage. The user alone will bear the risk.
1.52
1.53
1.51
1.93
1.51
1.93
1.53
1.1
1.2
1.8
1.71
1.3
1.72
257 135
en
Product description
1.91
1.2
1.1
2.04
1.52
1.91
1.42
1.0
1.40
4.1
2.0
1.71
1.43
1.7
1.72
1.41
2.03
2.05
1.5
2.0
V03–03.2009