Using The Blender; Blending Tips - Hamilton Beach 51141 Manual De Instrucciones

Using the Blender

IMPORTANT: Your blender jar
and blade with collar are subject
to wear during normal use.
Always inspect jar and collar for
nicks, chips, or cracks. Check the
blade for breaks, cracks, or chips.
If any parts are damaged, do not
use. Call our toll-free customer
service number to obtain
replacement parts.
4. Unplug. Twist blending jar
counterclockwise to unlock.
Lift up blending jar to remove.
1. Add ingredients to jar. Do NOT
fill ingredients above the max fill
line. Carefully place cutting blade
assembly with collar onto jar
and twist until securely closed.
5. Remove cutting blade assembly
with collar from jar. Hand-
tighten drinking lid onto jar.
w WARNING
Burn Hazard.
Do not blend hot ingredients. Pressure may build, causing jar to
pop off and hot ingredients to erupt.
2. Turn jar upside down and
place onto base, aligning the
arrow on the collar with the
unlocked icon on the base.
Twist clockwise to lock into
place.

Blending Tips

• For best results, place ice or frozen ingredients in jar first so when
turned upside down to blend, ice will be on the top.
• Do not chop or process hard foods such as cheese, crackers, or meat.
• If blending action stops during blending or ingredients stick to sides
of the jar, turn blender OFF. Remove jar, blade with collar and use a
narrow rubber spatula to stir.
• Do not process hot foods or liquids in blender.
• Avoid bumping or dropping the blender.
• If blender stops working, unplug and allow 15 minutes before using.
Plug into outlet to start blending.
3. Plug into outlet. Turn
control dial to the right for
low and high speeds or left
for pulsing. Blend 15 to 30
seconds or until smooth.
Hold jar in place while
blending. Always operate
on a countertop or other
supporting surface.
5