Descargar Imprimir esta página

NORTH STATES 4916 Instrucciones página 4

Ocultar thumbs Ver también para 4916:

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 4
Tighten both of the bottom tension knobs 4A by turning them clockwise at the same time 4B.
Tighten both of the upper tension knobs 4C by turning them clockwise at the same time, so the gap
between
4A
4C
4E
Note:
When tightening, the distance between the 4 tension bolts shoul
Operation
Opening the gate locking system (see Figure 5A):
1. Rotate the locking handle to the vertical position.
2. Depress the release button as shown.
3. Lift the door up until it swings freely.
4. Swing the door open in desired direction.
Closing and latching the gate (see Figure 5B):
1. Simply release the gate and allow it to swing closed (unless the Stay-Open feature is used).
2. To activate the triple latch, rotate the locking handle to the horizontal position, as shown in figure 5B.
5A
4
Note: Verify proper gate installation by partially opening and releasing it several times.
The door will swing closed and double-latch automatically. Regularly check tension knobs
and rubber pads to make sure the gate is securely in place.
4F
3
4
2
1
1.5~2mm
4B
4D
Figure 4E, 4F.
4G
5B
1
2
Page 4

Publicidad

loading

Este manual también es adecuado para:

4917