Promise Technology VTRAK E-Class Guia De Inicio Rapido página 8

VTrak Quick Start Guide
Figure 4 VTrak J-Class I/O Module
To connect a VTrak E-Class subsystem to a VTrak J-Class expansion chassis:
1. Find the SAS data cables that ship with the J-Class.
2. Connect one end of a SAS data cable to the SAS expansion port on the
VTrak E-Class RAID controller. See Figure 5 on page 9.
3. Connect the other end of the SAS data cable to the Diamond icon SAS port
on the VTrak J-Class I/O module. See Figure 5 on page 9.
4. If your VTrak E-Class has dual RAID controllers and your VTrak J-Class has
dual I/O modules, connect a second SAS data cable between the other
RAID controller and I/O module in the same manner.
5. Optional. If your system has multiple VTrak J-Class expansion chassis,
connect their SAS data cables:
• From the Circle icon SAS port on the I/O module of the First VTrak
J-Class
• To the Diamond icon SAS port on the I/O module of the Second VTrak
J-Class
See Figure 5 on page 9 and Figure 6 on page 10.
Be sure all of your SAS data connections are Circle -to- Diamond .
Circle Icon Diamond Icon
RJ11 Serial Connector
SAS data ports
115200
8 N 1
8
115200
8 N 1
115200
8 N 1
VTrak J-Class