Promise Technology VTRAK E-Class E830f Guia De Inicio Rapido página 16

VTrak E-Class Quick Start Guide
Fibre Channel SAN – No Single Point of Failure
An FC SAN with no single point of failure requires:
• Two FC switches
• FC HBA card in the Host PC or Server
Two FC HBA cards are an option
• A network switch
• A network interface card (NIC) in each Host PC or Server
Data Path
To establish the data path:
1. Connect an FC data port on the left controller to the FC HBA card in one of
the Host PCs or Servers.
See page 17, Figure 12.
2. Connect another FC data port on the left controller to the FC HBA card in the
other Host PC or Server.
Connect an FC data port on the right controller to the FC HBA card in one of
3.
the Host PCs or Servers.
4. Connect another FC data port on the right controller to the FC HBA card in
the other Host PC or Server.
Keep your data paths organized to ensure redundancy.
For multipathing (MPIO) applications, see the VTrak E-Class Product
Manual on the CD.
JBOD Expansion
To add JBOD units:
Connect the SAS expansion port on the left controller of the RAID
1.
subsystem to the SAS circle/in port on left I/O module of the first JBOD unit.
See page 17, Figure 12.
2. Connect the SAS expansion port on the right controller RAID subsystem to
the SAS circle/in port on right I/O module of the first JBOD unit.
3. Connect the SAS diamond/out port on left I/O module of the first JBOD unit
to the SAS circle/in port on left I/O module of the second JBOD unit.
Connect the SAS diamond/out port on right I/O module of the first JBOD unit
4.
to the SAS circle/in port on right I/O module of the second JBOD unit.
For a list of supported FC HBAs, Switches and SFPs, download
the latest compatibility list from the PROMISE
Important
16
support website.