Cisco Linksys WRT54GR Manual De Instrucciones página 5

• L2TP (Israel only): Select this setting only if you are connecting to the
internet using an L2TP connection. Check with your ISP for setup
information.
E
Click the Save Settings button when you are finished selecting your internet
connection settings.
F
Select the Wireless tab's Basic Wireless Settings screen to configure the
Router for your wireless network.
G
Select one of the following Wireless Network Modes:
• Mixed: Select this setting if your wireless network has both Wireless-G
and Wireless-B devices.
• G-Only: Select this setting if your wireless network only has
Wireless-G devices.
• B-Only: Select this setting if your wireless network only has
Wireless-B devices.
• Disable: Select this setting if you want to disable the router's wireless
networking feature.
H
Enter a unique name in the Wireless Network Name (SSID) field.
The SSID is the network name shared among all devices in a wireless
network. The SSID is case sensitive, must not have more than 32 characters,
and must be identical for all devices in the wireless network.
NOTE: For added security, change the default SSID to a unique name.
I
Select a Wireless Channel from the list provided. Make sure all of the
devices in your wireless network are set to broadcast on the same
channel, or they may not function correctly.
J
Select Enable or Disable for the Wireless SSID Broadcast setting. When
wireless clients survey the local area for wireless networks to associate with,
they will detect the SSID broadcast by the Router if this setting is enabled. If
this setting is disabled, the router will not broadcast its SSID.
K
Click the Save Settings button when you are finished selecting wireless
network settings.
L
Turn off your broadband modem, then turn it back on again.
5