Charging The Mobilelite Wireless; Battery Led; Battery Backup - Kingston MobileLite Wireless Pro Manual Del Usuario

Charging the MobileLite Wireless

We urge you to fully charge the MLWPRO before you begin to use it. This can take up to four hours with
a 2A power adapter. The MLWPRO can also be charged with a computer's USB port, or a USB power
adapter (minimum 1.2A).

Battery LED

The battery indicator light on the front of the MLWPRO indicates the current battery strength and tells you
whether the MLWPRO is charging when it's connected to a computer or outlet. The battery indicator's
LED blinks when it is charging and has a solid green LED when it is finished.
The battery LED also indicates how much battery life is left while the MobileLite Wireless Pro is powered
on. Green indicates 51% - 100% battery charge remaining; orange indicates 25% - 50% battery charge
remaining; and red indicates less than 25% battery charge remaining.
51%-100% battery charge 25%-50% battery charge <25% battery charge

Battery Backup

In addition to being its own Wi-Fi network,
MLWPRO can also be used as a battery backup.
This feature allows you to charge a mobile device
using the built-in USB port.
To use this function, with the MLWPRO powered
off, attach your mobile device to the USB port on
the MLWPRO using the mobile device's own USB
power cable.
With MobileLite Wireless Pro powered on, the
MLWPRO battery can still charge your device, but
the battery will be drained more quickly because it
is broadcasting a Wi-Fi signal while charging the
(not drawn to scale)
mobile device.
The LED will flash to indicate the mobile device
is charging.
Document No. iOS-MLWPRO-011816.A00 MobileLite Wireless Pro Page 7 of 29