1
Safety
a
1
Safety
1.1
Action-related warnings
Classification of action-related warnings
The action-related warnings are classified in accord-
ance with the severity of the possible danger using
the following warning signs and signal words:
Warning symbols and signal words
a
Danger!
Imminent danger to life or risk of severe
personal injury
e
Danger!
Risk of death from electric shock
a
Warning.
Risk of minor personal injury
Caution.
b
Risk of material or environmental damage
2
1.2
Intended use
There is a risk of injury or death to the user or oth-
ers, or of damage to the product and other property
in the event of improper use or use for which it is
not intended.
The safety assembly is used as a safety device with
closed domestic hot water cylinders with a nominal
capacity of up to 1000 l.
It contains all of the fittings that are required to
equip closed domestic hot water cylinders up to
1000 l in accordance with DIN 1988.
The enclosed isolation valves must not be used to
restrict the flow rate, because this is not intended
use.
Intended use includes the following:
- observance of accompanying operating, installa-
tion and servicing instructions for the product
and any other system components
- installing and fitting the product in accordance
with the product and system approval
- compliance with all inspection and maintenance
conditions listed in the instructions.
Any other use that is not specified in these instruc-
tions, or use beyond that specified in this document
shall be considered improper use. Any direct com-
mercial or industrial use is also deemed to be
improper.
Caution.
Improper use of any kind is prohibited.
Installation instructions 0020230764_00
a