PNI GD-01 Manual De Usuario página 6

The GD-01 gas sensor only with audible warning - is built just to alert
the presence of a gas by a beep.
Solutions in the event of an alarm
Please open the door and the window to let the gas come out
of the room, close the gas supply and do not touch any
electrical switch or power cord and do not use the fire.
Look for an authorized technician to detect the source of the gas
leakage and to fix the problem.
Ensure ventilation of the room after repair, the alarm will
automatically shut down.
Maintenance
Normal test with lighter: use a normal gas lighter and insert gas into a
normal plastic bag. Allow to collect gas for 3-4 minutes. Insert the gas
sensor into the gas bag. If the sensor triggers, the alarm detector is in
the parameters. (Hint: do the test once a month to demonstrate the
ability of the detector).
Normal cleaning: Clean the dust sensor or other deposited
substances to ensure normal operation. Before cleaning, please
close the sensor, then clean the dust with a soft brush and do not
clean directly with chemicals or water.
Do not use some aqueous substances near the sensor. Do not
use sprays to kill insects, oil, alcohol, etc.
Maintenance
An inspection of the appliance should be performed regularly. In the
event of a fault, please contact the supplier for immediate repairs.
2