Tripp-Lite U357-025-SEC El Manual Del Propietario página 6

Modifying Your Password
To change your password, follow these steps:
1. Press and hold the "*" button. At the same time,
2. Enter the old password and press the "#"
3. Enter the new password and press the "#" button
4. Reenter the new password and press the "#"
16-11-238-933690.indb 6
connect the included USB cable between the
USB port on the unit and a USB port on the host
computer. After approximately 5 seconds, the red,
green and orange LEDs will illuminate.
button to enter. Only the red and green LEDs will
illuminate.
to save. The blue LED will blink while the red and
green LEDs remain illuminated.
button to confirm the password change was
successful. The blue LED will blink. The red and
green LEDs will then illuminate to indicate a
successful password change.
6
12/20/2016 4:20:37 PM