Commercial Electric FP2X2/4WY/WH/HDT Guía De Uso Y Cuidado página 6

Installation (continued)
8
Connecting the Swing Arms
□ Insert the swing arm's key hole slot into the
mounting bracket plate's hanging screw.
9
Attaching the Panel Light
□ Feed the junction box and fixture wires through
the mounting bracket plate's center hole.
□ Raise the fixture to the direction of the arrow on
the swing arm.
Changing Color Settings
1. Soft White - Bright White - Daylight - Light Switch
Marks on the lamp: SW-BW-DL-Switch
2. When the slide switch is set to SW (Soft White), the
color temperature fixes at 3000K.
3. When the slide switch is set to BW (Bright White), the
color temperature fixes at 4000K.
4. When the slide switch is set to DL (Daylight), the color
temperature fixes at 5000K.
5. When the slide switch is set to SWITCH, the color
temperature can be changed from SW-BW-DL with your
existing light switch.
6. To change color temperatures using your existing light
switch:
A. Set the slide switch on the back of the fixture to
"SWITCH".
(Soft White) (Bright White)
SW BW
10
Securing the Panel Light
□ Once the fixture has been raised and is flush to the
ceiling, lock the fixture by moving it towards the
opposite direction it was raised.
(Daylight) (Light Switch)
DL
B. Toggle your light switch ON and OFF within 0.5-3 seconds to
cycle though the three different color temperatures.
C. The fixture will remember the last color temperature selected
after the fixture has been on a selected color temperature
for 10 seconds and eventually turned off. To maintain
selected color, do not toggle switch as detailed in the prior
step, but leave off for 10 seconds. The next time the fixture
is turned on, the fixture will emit the last color temperature
selected.
7. The reset function is used when using multiple Color
Selectable lighting products operating from the same light
switch. In the event multiple fixtures are not displaying the
same color at the same time, fixtures must be RESET using
your existing light switch. Simply toggle the wall switch ON
and OFF 7 times within 10 seconds. (ex: Fixture in the ON
position, toggle the wall switch ON and OFF in about 1 to 1.5
seconds. Repeat 7 times.)
6
Switch