Technical Specifications - StetSom DB3000 Instrucción

Technical specifications

Minimum output impedance:
Number of channels:
Power output @ 14.4V:
Power output @ 12.6V:
Input sensitivity:
Signal to noise ratio:
Frequency response (-3dB):
Low pass filter (crossover):
Subsonic filter (crossover):
Bass boost:
Input impedance:
Supply voltage:
Musical consumption @ 12.6V:
BASS consumption @ 12.6V:
Dimensions (H x W x L):
Weight:
The data measured are based on STETSOM laboratory equipment. Test reference in frequency
from 60hz with THD + N at ≤1% in impedances as indicated in each measurement. The electronic
components and the manufacturing process may present manufacturing variations, thus leading
to a variation in the measurements made.
Any updates made in this manual will be available for customers to consult free of
charge on the brand's site.
It is recommended that the updated manual be consulted whenever needed.
Images contained in this manual are merely illustrative and may differ from the actual product.
1 OHM
3950W RMS @ 1 Ohm
2600W RMS @ 2 Ohms
3100W RMS @ 1 Ohm
2000W RMS @ 2 Ohms
Boost: 0 ~ +18dB (Fixed 35Hz)
169A
338A
3.07" x 9.11" x 10.8"
18
2 OHMs
1
3700W RMS @ 2 Ohms
2350W RMS @ 4 Ohms
3000W RMS @ 2 Ohms
2000W RMS @ 4 Ohms
200mV
>90dB
5Hz ~ 250Hz
35Hz ~ 250Hz
5Hz ~ 35Hz
20K Ohms
9V ~ 16V
147A
295A
6.6 lb