Connecting Your Headphones - Audeze iSINE10 Guía Del Usuario Y Garantía

Connecting your Headphones

Connect the Cipher Lightning
plug to your iDevice
Source: Connect the input end of the cable to your source device.
Output: Look for the (L)eft and (R)ight indicators on the two 2-pin cable
ends and match them to the headphones accordingly. Ensure that both
sets of cable indicators align with the indicators on the headphones and
insert the plugs. You will feel a gentle click indicating the plugs are locked
in place.
NOTE: The connectors are keyed and can only fit in one direction. DO NOT
force the connector in backwards, doing so will damage your headphones.
Connect the 3.5mm audio
OR
plug to your source component
Match the inside L and R indicators
Ensure the plug is fully inserted