Bushnell TROPHY CAM 8MP HD Manual De Instrucciones página 22

Parameter
LED Control
(Multi-Flash
feature)
Camera Name
Video Size
(only affects
video clips in
Video mode)
22
Settings
(Bold=default)
High, Medium,
Low
(Input)
See "Using the
Setup Menu Input
Screens, pg. 31"
848x480,
1280x720,
1920x1080
Description
Controls how many LED lamps fire
when images are taken in low light.
"High"=all 33 LEDs fire, which is
the default setting. Set to Medium or
Low if you are getting overexposed
flash photos or will place the camera
at very close range to the subject
you want to photograph. In general,
select High if most of your intended
subjects will be over 30 ft. from the
camera, Medium for the 15 to 30 ft.
range, and Low for subjects under
15 ft. away. Note: in video mode,
with LED Control set to High, the
maximum length of each video
captured at night will be 15 seconds
to avoid excessive battery drain,
even if the Video Length parameter is
set to a higher value (see next page).
Allows the user to set a custom
name for the camera. Useful for ID
purposes when multiple cameras are
setup, since each camera will imprint
its name on all photos (but not
videos) it captures.
Selects video resolution (in pixels per
frame). Higher resolution produces
better quality videos, but creates
larger files that take up more of the
SD card capacity (fills up faster).
The highest settings provides HD
video. Using high speed SD cards
(SanDisk SDHC class 6 or higher)
®
is recommended if you will use the
1280x720 or 1920x1080 video
settings.