LIFT CORPORATION Sht. 11 of 30 DSG#
9. Route home run cable through the hole in the corner post (FIG. 11-1)
to the charge controller in battery box (FIG. 11-2). If needed, drill a
hole in corner post near vehicle fl oor to retrieve home run cable (FIG.
11-2). Use metal cable clamps (Kit items), as needed, to secure home
run cable to truck/trailer body.
© MAXON Lift Corp. 2020
Draft 12/21/2020
HOME RUN
CABLE
CORNER POST
CURB SIDE
ROUTING HOME RUN CABLE THROUGH CORNER POST
HOME RUN
CABLE ACCESS HOLE
ROUTING HOME RUN CABLE TO BATTERY BOX
M-20-17
SOLAR PANEL
FIG. 11-1
CABLE
(IF NEEDED)
FIG. 11-2
Rev. - Date: 12/09/20
CHARGE
CONTROLLER
BATTERY
BOX
VEHICLE
BATTERY