Nomenclature; Base Unit - Front View - Triton 4739 Manual De Usuario

NOMENCLATURE

BASE UNIT FRONT VIEW
Touch Screen
User Interface
Traction Cord
Patient
Interrupt
Switch
Receptacle
The Base Unit serves to house the mechanical and electrical components
that provide the actual traction tension for the Triton traction unit under
the electronic control and supervision of the Controller.
Clevis
Attachment Slots
sEMG
Lead Wire
Receptacle
(Model 4778,
2841 or with
sEMG Module
•
P/N 4766)
Should Traction Cord fray or damage to the Traction Cord or knot be
apparent from visual inspection, immediately stop use of the unit and
contact the Dealer or Chattanooga Group for service.
•
Do not attempt to repair the Traction Cord.
•
An improperly tied knot may result in injury. Do not attempt to re-tie
the knot unless properly trained.
8
Triton® Traction
Traction Cord
To prevent wear and fraying, the unit
should be mounted facing toward the
desired direction of pull so that the
Traction Cord does not contact the
side of the slot from which it extends.