Operation; Putting The Device Into Operation And Switching It Off; Setting The Blower Levels; Swivel Function - Silvercrest STVM 15 A1 Instrucciones De Servicio

5. Operation

5.1 Putting the device into
operation and switch-
ing it off
1. Insert the mains plug 7 into a mains
socket corresponding to the technical
data.
2. Switch on the power supply by turning
the dial 1 to position 2, 3, 5 or 6.
3. Switch off the power supply by turning
the dial 1 to position 4 (0).
5.2

Setting the blower levels

With the blower levels you can choose how
quickly the device circulates the air in the
room.
The device has two blower levels:
- Level I (weak): turn the dial 1 to posi-
tion 5;
- Level II (strong): turn the dial 1 to po-
sition 3.
5.3

Swivel function

The device has a swivel function.
This enables the device to swivel back and
forth and thereby distribute the outflowing
air more uniformly in the room:
1. Switch on the swivel function by turning
the dial 1 to
level or 6 for the weak blower level.
2. Switch off the swivel function by turning
the dial 1 to position 3 or 5.
16 GB
2 for the strong blower

6. Cleaning

In order to enjoy your device for a long time,
you should regularly clean it.
DANGER! Risk of electric
shock!
Disconnect the mains plug before any
cleaning.
Never immerse the device in water.
Do not let water or cleaning agent run
into the device.
WARNING! Risk of material damage!
Do not clean using sharp objects or
abrasive cleaning agents.
1. Carefully remove coarse dust deposits
with a vacuum cleaner.
2. Clean the outside of the device with a
slightly damp cloth. You can also use a
little detergent.
3. Wipe off with a cloth that has been
moistened with clean water.
4. Do not use the device until it is com-
pletely dry again.