Central / Bass (Orange); Rear Speaker (Black); Line In (Light Blue) - ASROCK Z97 Extreme9 Manual De Instrucciones

* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status Description
Of No Link
Blinking Data Activity
On Link
** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output Front Speaker
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the
front panel audio header. Ater restarting your computer, you will ind the "Mixer"
tool on your system. Please select "Mixer ToolBox"
multi-streaming", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then
you are allowed to select "Realtek HDA Primary output" to use the Rear Speaker,
Central/Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use
the front panel audio.
*** he eSATA connector supports SATA with cables within 1 meters. he SATA3_A4 connector is
shared with the eSATA port.
Speed LED
Status
Of
Orange
Green
Rear Speaker
(No. 9) (No. 7)
V --
V V
V V
V V
Description
10Mbps connection
100Mbps connection
1Gbps connection
Central / Bass Line In
(No. 6) (No. 8)
--
--
V
V
, click "Enable playback
Z97 Extreme9
--
--
--
V
5