Swing-N-Slide Tunnel Twister Slide Instrucciones De Ensamblaje página 5

Fig. 2
2-1/2'' screw
B. Slide Barrier Cont.
Note: The recommended opening for this slide is
22-1/4'' Wide x 28'' High. The wood
around the Slide Opening must be a
minimum of 3'' Thick and 3-1/2'' Wide.
1. Install (2) 2'' x 4'' x 28'' Boards as shown in
(Fig. 2a).
2. Install (2) 2'' x 4'' x 22-1/4'' Slide Support
Boards on the inside of your barrier as shown in
(Fig. 2b).
Tunnel Twister ssembly Instructions
Fig. 2a
Fig. 2b
2-1/2'' screws
per board
INSIDE VIEW
UNIT WAS ROTATED 180˚ FOR THIS VIEW
5
28''
(4)
2-1/2'' screws
per board
(4)