Swing-N-Slide Tunnel Twister Slide Instrucciones De Ensamblaje página 7

Tunnel Twister ssembly Instructions
Fig. 4
(1)
2-1/2''
Lag Bolt
(3)
1-1/2''
Lag Bolt
(1)
2-1/2''
Lag Bolt
1-1/2'' Lag Bolt
2-1/2'' Lag Bolt
D. Slide Entrance and Elbow
1. Attach Entrance Section as shown in (Fig. 4).
2. Align the first Elbow Section to the Entrance
Section with the seams aligned and the exit facing
downward. Rotate the Elbow (2) holes to the left.
3. Secure in place as shown in (Fig. 4a).
NOTE: Hand tighten the loc nuts only.
(2)
1-1/2''
2-1/2''
Lag Bolt
Lag Bolt
(1)
(2)
2-1/2''
1-1/2''
Lag Bolt
Lag Bolt
(1)
(3)
1-1/2''
Lag Bolt
Fig. 4a
(1) 3/4'' Bolt
(2) Flat Washer
(1) LocNut
Per Hole
Section
7
Section
#4
#3