Chauvet DJ Mini 4BAR 2.0 Guía De Referencia Rápida página 3

Mini 4BAR™ 2.0 QRG EN
Unpack your Mini 4BAR™ 2.0 and make sure you have received all parts in
To Begin
good condition. If the box or contents appear damaged, notify the carrier
immediately, not Chauvet.
The Mini 4BAR™ 2.0 is an enhanced, brighter version of the Mini 4BAR™
Description
with redesigned square pods. Options include DMX control, Master/Slave
mode, sound-active programs and power linking. Four individually
adjustable heads offer total room or stage coverage. Easy setup and tear
down with the included tripod, carrying bags and footswitch. The Mini
4BAR™ 2.0 coordinates with other 4BAR™ fixtures via Master/Slave mode.
Power In
Fuse Holder
Power Out
Display and
Control
Buttons
Overview
(back)
Footswitch Input
Microphone Sound Sensitivity Knob
DMX In/Out
This product has an auto-ranging power supply that can work with an input
AC Power
voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
For the maximum number of Mini 4BAR™ 2.0 products that you can power
link at each voltage, see the User Manual or the label on the product.
Fuse 1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
Replacement
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Mounting
Pod Pan Adjustment
Product
Mounting
Diagram
Tripod Insertion
Pod Tilt Adjustment
3