Eckerle EE900M Instrucciones página 5

Water level sensor operation
Install the pump in the intermediate ceiling using the
provided mounting holes. Connect the water level sensor
to the pump. The installation has to be scoop-proof. An
installation in wet or frosty environments is not allowed.
Warning: The drain tube is to be mounted so that air
will disperse freely.
Alarm switch notes
The integrated alarm switch (NO, normally open) is used
for overflow detection and should always be wired in any
case. To prevent a false alarm, the pump has a build in
alarm delay of 10s.
Maximum allowed Voltage: 48 V AC/DC
Maximum allowed Current: 1.5A (resistive load)
Water level sensor
The water level sensor has 3 switching points.
Replacement items:
Part-Number
Eckerle 9001301008
Gotec 110609
Eckerle 9704010011
Gotec 114019
Warranty
1 year. This warranty covers all parts with material or
manufacturing faults. The buyer's only recourse is the
replacement or repair of the defective parts. Under no
circumstances can labour costs and any consequential
damage be cited as a basis for a complaint. Any returned
units must be complete and must be accompanied by a
written list of the defects ascertained.
We do not accept any liability in case of nonconforming
installation or noncompliance with the specifications or
maintenance recommendations.
Conformity:
All data contained in these specifications are solely
intended to describe the product and do not constitute
warranted characteristics in the legal sense.
Subject to technical change.
- 5 -
GB
Description
EE900M water level sensor
EE900M temperature sensor, 3m