STEINEL PROFESSIONAL IR Quattro KNX Manual De Instrucciones página 16

Accessories
Kaiser junction box for stud
walls
EAN No.: 4007841 000370
Clamping-type ceiling adapter
EAN No. 4007841 002855
Surface-mounting adapter
AP Box KNX
EAN no.: 4007841 003029
How it Works / Basic Function
The infrared and HF presence
detectors from the Control
PRO range control lighting as
well as HVAC, e.g. in offices,
schools, public buildings or at
home, in relation to ambient
light level and the presence of
persons.
The IR Quattro with highly ad-
vanced lens provides a square
detection zone, as the typical
shape of a room, in which the
smallest of movements are
sensed.
Operation
Note: To calibrate the pres-
ence detector, please go to
www.knx.steinel.de
1. Issue Physical address
and generate calibration
programme in the ETS.
Guard cage
EAN no.: 4007841003036
RC6 KNX service remote
control
EAN no.: 4007841 593018
User remote control
RC7 KNX
EAN no.: 4007841 592912
Using modern, high-frequency
technology, the HF 360 guar-
antees detection of movement
absolutely anywhere irrespec-
tive of radiated temperature.
Sensing movement in two di-
rections, the DUAL HF-sensor
is ideal for corridors in hotels,
schools and office buildings.
Presence Control has a low in-
trinsic power consumption.
2. Load the Physical Address
and Calibration Program
into the presence detector.
When you are prompted to
press the programming
button (8).
- 15 -
í Presence detection
í Controlling lighting with
brightness control
í HVAC control
The function to be used (acti-
vated) is defined by the "Gen-
eral Settings" parameter win-
dow using the ETS3.f version
of the Engineering Tool Soft-
ware (ETS) and higher.
3. The blue LED goes out
once programming has
been successfully com-
pleted.