Device Settings
Climate Control
Climate Control is designed to make therapy more comfortable by
enabling constant temperature and maintaining humidity.
This feature:
•
delivers comfortable humidity level and temperature during
therapy
•
maintains the set temperature and relative humidity during
sleep to prevent dryness in the nose and mouth
•
can be set to either Auto or Manual
•
is only available when both the ClimateLineAir 11 and
HumidAir 11 tub are attached.
Climate Control - Auto setting
Auto is the recommended and default setting. It is designed to
make therapy as easy as possible so there is no need to change
the temperature or humidity settings.
•
Sets the tube temperature to Auto (80ºF/27ºC). If the air in the
mask is too warm or too cold, you can adjust the tube
temperature to anywhere from 60 to 86ºF (16 to 30ºC) or turn
it off completely
•
Adjusts the humidifier output to maintain a constant,
comfortable humidity level of 85% relative humidity
•
Protects against rainout (water droplets in the heated air
tubing and mask).
Climate Control - Manual setting
Manual is designed to offer more flexibility and control over
settings and offers the following:
•
Temperature and humidity can be adjusted to find the most
comfortable setting
•
Temperature and humidity level can be set independently
•
Rainout protection is not guaranteed. If rainout does occur,
first try increasing the tube temperature
•
If the air temperature becomes too warm and rainout
continues, try decreasing the humidity.
Note: If Climate Control is set to Manual, the Auto Tube
Temperature setting is not available.
Humidity Level
The humidifier moistens the air and is designed to make therapy
more comfortable.
•
If you are getting a dry nose or mouth, turn up the humidity
•
If you are getting any moisture in your mask, turn down the
humidity.
•
You can set the Humidity Level to Off or between 1 and 8,
where 1 is the lowest humidity setting, and 8 is the highest
humidity setting.
2