Installation Diagram; Installation Of The Indoor Unit; Standard Mounting - McQuay C Serie Manual Del Usuario

Indoor Unit
Air Discharge Louver
Air Discharge Grille
Air Intake Grille
(Inside Air Intake Grille)
Fig. A
Preliminary Site Survey
• Electrical supply and installation shall conform to the local authority (e.g. National Electrical Board) codes and regulation.
• Electricity supply lines must be independent of welding transformers which can cause high supply fluctuation.
• Ensure that the installation location is convenient for wiring and drainage.

Standard Mounting

Ensure that the overhead supports are strong enough to hold the weight of the unit. Position the hanger rods, and check for its
alignment with the unit. Also, check that the hangers are secured.

INSTALLATION DIAGRAM

Signal Receiver
Indicator Lights
Air Filters
Air Discharge Nozzle

INSTALLATION OF THE INDOOR UNIT

Wrap the Insulated pipe with the
finishing tape from bottom to top
Refrigerant Piping
Air Intake
1-4
Air
Intake
Outdoor Unit
Fig. B