Installation Steps; Care And Cleaning - AVS Aerovisor Instrucciones De Instalación

Installation Steps

Align the visor to the door by matching the radius of the part with
the curve of the door.
3
Gently press the exposed areas of tape against the surface and
verify position.
door frame
tape
PRESS
visor
rubber channel
Cross Section of Visor in Place
5
Apply pressure along all flanges to ensure proper adhesion of tape.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
The front flange butts flush against the mirror cap and attaches to
the rubber window channel. Note diagram for appropriate vehicle.
Dodge Pick Up Truck
4
With the visor in its final position, remove the remaining tape liner
6
Repeat Steps 1-7 for opposite side.
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
OR
Nissan Pick Up Truck
by pulling on free ends.