Fein WSG12-125 Instrucciones De Uso página 14

3 41 01 071 06 0.book Seite 14 Montag, 17. Oktober 2005 1:50 13
EN
Instruction manual for angle grinder.
Symbols, abbreviations and terms
used.
The symbols used in this Instruction Manual and
where necessary on the power tool, serve to
draw your attention to possible hazards when
working with this power tool.
Symbol Term, meaning
Accessory
Action
General prohibition sign
Touching prohibited
General mandatory sign
Read documentation
Open the folding page
Pull out mains plug
Use eye-protection
Wear ear protection
Use dust mask
Use protective gloves
Danger warning
Hot surface warning
European conformity symbol Confirms the conformity of the power tool with
14
WSG 12-125 / WSG 12-150 / WSG 12-70 E
It is mandatory for you to understand the sym-
bols/information and to act accordingly, in order
for the power tool to be implemented more
efficiently and more safely.
The safety warnings, information and symbols
do not serve as a substitute for the measures to
be taken according to the regulations for the
prevention of accidents.
Explanation
Application tool, e.g. grinding wheel, cutting
wheel, grinding cup, wire brushes, etc.
Action to be taken by the user
Follow the instructions in the adjacent text!
Do not touch the rotating grinding wheels.
Follow the instructions in the adjacent text!
Be absolutely sure to read the enclosed documen-
tation such as the Instruction Manual and the Gen-
eral Safety Instructions.
For a better understanding, unflap the folding page
at the beginning of this Instruction Manual.
Before commencing this working step, pull the
mains plug out of the socket. Otherwise there will
be danger of injury if the power tool should start
unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Observe the information in the adjacent text!
An exposed surface is very hot if touched and
therefore dangerous.
the directives of the European Community.