VWR 89094-746 Manual Del Usuario página 4

MINIMUM AND MAXIMUM MEMORY
There are four points that are automatically recorded into memory:
•
Minimum (MIN) Probe 1 (P1) Temperature Achieved with time-of-day and date achieved
•
Maximum (MAX) Probe 1 (P1) Temperature Achieved with time-of-day and date achieved
•
Minimum (MIN) Probe 2 (P2) Temperature Achieved with time-of-day and date achieved
•
Maximum (MAX) Probe 2 (P2) Temperature Achieved with time-of-day and date achieved
Minimum and maximum temperature memories are NOT programmable. The minimum
temperature recorded into memory is the minimum temperature achieved since the last time the
memory was cleared. The maximum temperature recorded into memory is the maximum temperature
achieved since the last time the memory was cleared. The minimum and maximum temperature
memories are maintained over the period since the memory was cleared.
Minimum and maximum memories are recorded for both sensors regardless of the display mode.
VIEWING MIN/MAX MEMORY
1. Slide the PROBE switch to the desired position (1 or 2) to display the desired temperature sensor
readings.
2. Slide the DISPLAY switch to the MIN MAX position. The display will show the current temperature
and minimum/maximum memory for the selected probe.
VIEWING MIN/MAX MEMORY DATE/TIME
1. Slide the PROBE switch to the desired position (1 or 2) to display the desired temperature sensor
readings.
2. Slide the DISPLAY switch to the MIN MAX position. The display will show the current temperature
and minimum/maximum memory for the selected probe.
3. Press the EVENT DATE TIME button, the minimum temperature achieved by that probe along with
the time-of-day/date the temperature was achieved will
MIN and TIME appearing on the display).
4. Press the EVENT DATE TIME button a second time, the maximum temperature achieved by that
probe along with the time-of-day/date the temperature was achieved will appear on the display
(indicated by MAX and TIME appearing on the display).
Note: If no button is pressed for fifteen (15) seconds, the unit automatically returns to the current
temperature display mode.
5. To exit from the memory display mode, press and release the EVENT DATE TIME button until MIN
appear on the display (indicated by
VWR Collection Manual ver 1, rel 1 25.04.2017