Publicidad
Idiomas disponibles
Idiomas disponibles
Elcross Lux lumbosacral belt model 3131BG, 3132BG, 3132G, 3133BG,
3133G (Fig. 1):
• Make sure that the adjustment straps (B) are placed over the Velcro
fasteners (C).
• Detach the Velcro strap (A) on the front of the belt. Place the Elcross Lux
belt at the correct height and position, (3 cm above the buttock crease),
without applying any tension.
• Adjust the belt correctly and close the Velcro strap on the front of the belt
(A). Detach the side straps (B) and pull them with equivalent tension, from
the back to the front. Close the side straps (B) over the front strap (A).
Elcross Lux abdominal pendulum belt model 3134BG (Fig. 2):
• Make sure that the adjustment straps (B) are placed over the Velcro
fasteners (C).
• Detach the Velcro strap (A) from side of the belt. Place the Elcross Lux belt
at the correct height and position, (3 cm above the buttock crease), without
applying any tension. Since this is a belt for pendulous abdomen, it will be
placed with the Velcro fastener (A) on the side, since the front part serves to
accommodate the abdomen.
• Adjust the belt correctly and close the Velcro strap on the side of the belt
(A). Detach the adjustment straps (B) and pull them with equivalent tension,
from the back to the front. Close the straps (B) on the front of the belt,
making sure that they remain underneath the belly, attached to the Velcro
straps.
Elcross Lux back support 3138BG (Fig. 3):
• It is advisable to use a mirror when putting the back support on. For hygiene
and comfort, it is recommended to wear a cotton garment, preferably
seamless, under the product.
• Wear the appropriate size back support as a waistcoat and close the Velcro
to fit the patient's body shape.
Product maintenance - washing instructions:
Machine wash at 30°C. Do not use bleach. Do not tumble dry. Do not iron. Do
not dry clean. Close all the Velcro straps on the surface of the garment before
washing.
Publicidad
